32 Bits
1) First of all, download the files I have placed at the top under "For 32bit ONLY"
2)Install MotionJoy, default driver placement will be here ("C:\Program Files\MotioninJoy\ds3").
3)Plug your PS3 controller in, you should notice windows has basic drivers installed, don't be fooled, they will not work.
4)From the Start button,run the "Start->All Programs->MotioninJoy->Install USB driver". Make sure to right click and "Run as administrator"or The driver will not install properly.
5)You should be done, if you would like to see Wireless pairing, just reply with a request.
64 Bits
1) First of all, download the files I have placed at the top under "For 64bit ONLY"
2)Install MotionJoy, default driver placement will be here ("C:\Program Files\MotioninJoy\ds3").
3)Plug your PS3 controller in, you should notice windows has basic drivers installed, don't be fooled, they will not work.
4)This part is a bit tricky, but listen up, go to Device manager and click on "Human Interface Devices" you wil notice there will be 1 or more (depending on your computer) listed as "USB Input Device" and one "HID-compliant game controller" right click on the game controller, go to details and click the drop down bar to Hardware Ids, check if at the end it is labelled "REV_0100" now, go to the USB Input Device do the same thing (Hardware Ids) and look for one that matches with the game controller (REV_0100). When you find it, proceed.
5)Click "Update Driver" select "Browse my computer for driver software"
6)Select "Let me pick from a list of device drivers on my computer" and Select "Have Disk"
7)It will now look like this:
8)Almost there, from the Start button,run the "Start->All Programs->MotioninJoy->Install USB driver". Make sure to right click and "Run as administrator" (IMPORTANT) or The driver will not install properly.
9)In ">Install USB driver", now open DSEO (Driver Signature Enforcement Override) and select "Sign a System File"
10)restart your computer (Once this is installed, you can now plug and play your PS controller) and click on "Enable Test Mode"
[autor DongerZ]
